applesauce Posted March 10, 2009 Report Share Posted March 10, 2009 Hey I am a long time Minidisc fan, but a recent join to this group. I have been very interested in getting a HI-MD player but I want one that is slot loading. Any chance there is a portable slot loading HI-MD player. If not does any one have any broken units or pictures to compare the inside of a HI-MD unit to a regular MD or NetMD player.My hope is to swap the laser/magnet assembly from a HI-MD player into a regular md slot loading mechanism. I fully expect it to never fit perfect into an older case but with a little hack sawing and a slightly larger case, I could have a slightly larger box with a slot loading HI-MD opening in the front and a USB in the back. Quote Link to comment Share on other sites More sharing options...
sector001 Posted March 10, 2009 Report Share Posted March 10, 2009 I could be wrong, but I don't think there was any portable HiMD recorder with a slot loader... Quote Link to comment Share on other sites More sharing options...
sfbp Posted March 11, 2009 Report Share Posted March 11, 2009 Not a chance. The mechanism of the decks is completely different, and no deck was ever made (by Sony) with HiMD.I just had a look inside mh busted JE-510 - it certainly is an intriguing idea. The killer is that the mechanism whereby the decks "slotload" is completely different from the "clamshell" arrangement of the portables. And none of the supporting electronics or connections on the deck are going to be connectable to the "mobile" drive. Quote Link to comment Share on other sites More sharing options...
applesauce Posted March 11, 2009 Author Report Share Posted March 11, 2009 No I agree there might be differences with slot loading and clamshell mechanics. But since the disk is sealed except for the bottom center and the bottom disc area, the rest isn't touched. They converted a xbox 360 drive to slot loading and they had to worry about the top and the bottom of the disc drive. MD only reads and touches the bottom of the disc, so even though its smaller it might be do-able.I would be most worried about if the Hi-MD laser/mag assemply travels farther or shorter then a regular md drive.I would love a slot loading 1 gb disc drive for my laptop or pc, I am going to try getting a donor slot md drive like an old sony or sharp 722 and a doner HI-MD drive. I was thinking the Sony MZ-NH600D would be a good drive, only 70-120 dollars and its HI-MD with usb connection. Any one have any opinion on any other cheap HI-MD drives to take apart. I want function and cheapness, looks don't matter. Quote Link to comment Share on other sites More sharing options...
tekdroid Posted March 11, 2009 Report Share Posted March 11, 2009 They converted a xbox 360 drive to slot loading and they had to worry about the top and the bottom of the disc drive. MD only reads and touches the bottom of the disc...both sides of the disc are used in MD. Quote Link to comment Share on other sites More sharing options...
applesauce Posted March 11, 2009 Author Report Share Posted March 11, 2009 You are right, i was foolishly only looking at my portable player, not thinking about the recording part that would go on the other side of the disc. I still want to attempt it however. Quote Link to comment Share on other sites More sharing options...
sfbp Posted March 11, 2009 Report Share Posted March 11, 2009 Up to you but it is a waste. The decks all have the nice little motor that pulls the disk in after you insert it - the slot-load mechanism depends on this. And ejects it when you press "Eject". No springs.The portables all work as follows: - for insertion, physically pushing the disk in against one or more torsion springs is what opens the cover to expose the writable surface (top and bottom)- for removal the opening of the clam shell is what releases the disk and ejects it. With a slot you have no way since there is no vertical motion possible. Quote Link to comment Share on other sites More sharing options...
Strungup Posted March 13, 2009 Report Share Posted March 13, 2009 You are right, i was foolishly only looking at my portable player, not thinking about the recording part that would go on the other side of the disc. I still want to attempt it however.It isnt just the head assembly , the entire circuit and mechanism , everything , because the "Hi" in HiMd is in the processor , not just the disc , it is the Programming and software , not just the hardware . Power management , all of it . It would be a cool idea though , I like slots as well. Quote Link to comment Share on other sites More sharing options...
alexis Posted April 1, 2009 Report Share Posted April 1, 2009 more precisely, MDs are read from the bottom of the disc without contact, but are written from the top of the disc, with contact.I think Hi-MDs work the same.both sides of the disc are used in MD. Quote Link to comment Share on other sites More sharing options...
WheelieBear Posted June 28, 2022 Report Share Posted June 28, 2022 Hey Applesauce, did you ever get this to work? I've been thinking about doing this myself, maybe removing the Tape deck of my CMT-DC-500MD bookshelf Hi-Fi and fitting one of my MZ-NH600s into the space. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.