mAjEsTiC

tru...but u will be able to after u mod it... :happy:

u'll be surprised actually...here in Aus sometimes retailers sell off old stock pretty cheaply...and that includes MD's...like Harvey Norman for example...i've managed to pick up a great deal on a few older model MD's for my friends...

either that or it's protected by SCMS...

sounds to me like ur player's bust...take it back for repairs or if ur brave enough rip it apart urself and clean the inside out...disassemble the whole mechanism inside and give it a nice clean with a can of compressed air and put it back together to see if that helps...(worked with my E900 btw)

yay :happy: new smilies... :grin: good work...

try cleaning the laser first...if not then ur unit went bust on u as it just doesn't want to read discs anymore...if cleaning it won't help then i think it's better to bring it in for repairs...that way u'll know that ur unit will work afterwards...

the only flaw with my iPods IMO is that they don't have enough protection for the hdd...drop it and the hdd fails...>< (had this happen to me once...)

well the 11EL, 12ELK and 33EL & 35ELK will work with that unit...the newer ones such as the 33EL and 35ELK would work better with the N510 than the 11EL and 12ELK since the remote config has been updated on the current models to make use of the extra functions that the 33EL/35ELK remotes have over the 11EL/12ELK...

nope BeatJam don't seem to like Sony units...but basically any program that is brought out by Sony (except RealOne Player of course) can all transfer over to NetMD units...

so u want to go from ur MD unit -> HiFi to use its speakers right? well i think the R909 features a LINE OUT on it so u run a normal 3.5mm stereo cable from the LINE OUT of the R909 to the LINE IN on your HiFi...provided that your HiFi has a LINE IN (usually in RCA so u need a cable that splits it from a normal 3.5mm stereo -> RCA Audio cable) and go to the HiFi and select the Aux mode or something similar to get sound from it...

if u can wait a while i suggest that u wait for the new Hi-MD's to come out and see how they compare with the current units...if they're not as we've expected then u can grab urself a good deal on the current units as the prices would've gone down due to the retailers selling off old stock...

i thought Type R was just for recording SP tracks and Type S uses Type R for recording but also uses the newer DSP to decode LP tracks???

there are a few remotes that would probably work on this model...were u after a specific one like it has to have backlit lcd etc???

yeh i agree...nice job...

when sonicstage is up and displaying that the unit isn't connected did u try to d/c the usb cable a reconnect it again??? usually this works for me to get rid of that problem...

did u make sure that ur Line In wasn't muted through window's sound panel??? try checking that...if not then is there anyway that u can check the input levels while recording??? if u own a Creative soundcard Creative's recorder will allow you to monitor the recording levels from the inputs so it give u a good indication whether or not anything is going through...

not too sure if it will record onto old media without reformatting it i'm afraid...

is that mic a cardiod??? not soo sure about the specs of mics sorry but we had the same problem with one of our recordings at a seminar and it worked out when we got two of the mics and a balanced audio unit...only then did we end up getting stereo sound...

ATRAC Type R is just in SP mode i'm not sure y ur JE510 cannot play it??? the higher end decks will have optic output (such as my JB980)...currently i don't think there are any IDE MD decks other than the ones i've seen inside VAIO desktops...not sure if u can buy them seperately though...Hi-MD is a good start as it will have faster than real-time digital u/l from MD->PC so IMO u should wait for it...

yep it will...the 11EL works with ur newly "hacked" unit...

sometimes this might happen...don't know why but it does...usually there's nothing wrong with the unit (my E900 plays up from time to time but it still reads MD's fine even after my friend dropped it out of the 1st storey window onto my driveway.... :? )

actually as kurisu has mentioned before on the forums u can find more info about d/l SS2.0 here...

i usually record SP via optic and not via NetMD...i think u can use the eq in SonicStage/OpenMG to help normalize the volume levels...if this doesn't work then u can use a program such as mp3Gain and normalize it through there...

have you tried to disconnect and reconnect the unit when SonicStage is up and running??? becoz usually this works for me...otherwise i think it'll be best if u do a complete uninstall of SonicStage and re-install it again...

yep it can work...but the button layouts might be a bit off for the 35ELK...the 12EL works fine though...