mafija Posted May 8, 2005 Report Share Posted May 8, 2005 (edited) According to kurisu, MDCF will provide all 1st and 2nd generation service manuals shortly.←Hi,I'm new here and i found a lot of interesting talks about tweaking MDs configurations.Can somebody tell me in very simple way about tweaking MZ-N10 model?Can the tweak make it better than it is now?When i enter in service mode i see:001Ver 1.600What i need to push more that i can see all default settings one by one.I change my pc before and now i have problem in checking in songs from my MD to PC.I try to use Real Media player but it brings me error that your songs must be queued and i don't find any info how to do it.Any sugestions how to transfer my songs to pc from MD in digital way w/o loosing the quality?I can use Line In option but it's not digital WMP 10 don't want to see my MD at all I try to add a new device but WMP opens Internet page which offers to buy new MP Help needed.Thanks in advance Edited May 8, 2005 by mafija Link to comment Share on other sites More sharing options...
Langrath Posted May 11, 2005 Report Share Posted May 11, 2005 (edited) Perhaps this will help somebodySee attachedGeorgMZ_NH600serman__sm_sd_.pdf Edited May 11, 2005 by Langrath Link to comment Share on other sites More sharing options...
SHORT Posted May 24, 2005 Report Share Posted May 24, 2005 Perhaps this will help somebodySee attachedGeorg←Thanks, I also found a service manual for MZNH700/MZNHF800 at minidisc.org(yes, there is only one manual for these two rather similar toys) Link to comment Share on other sites More sharing options...
sknight Posted May 25, 2005 Report Share Posted May 25, 2005 So we make make some headway on this project soon, I hope. Hopefully before my unit craps out. Link to comment Share on other sites More sharing options...
Embio Posted May 29, 2005 Report Share Posted May 29, 2005 right, so the way I read this, if I set 112 to 'CC', my NH900 will display a clock just like my mates NH1? no? Link to comment Share on other sites More sharing options...
sushi Posted June 3, 2005 Report Share Posted June 3, 2005 Bump... doh!Has anyone made any progress? Link to comment Share on other sites More sharing options...
heloo Posted June 8, 2005 Report Share Posted June 8, 2005 (edited) Hi everybody. I'm trying to figure out how to remove the European volume limitations on my MZ-NH600. I read at: http://www.avforums.com/forums/showthread.php?t=184051 that you can do it through the service menu, to an NW-HD3 EU Model, so surely you can do it to the others.I found a place for all of you, that sells service manuals for pretty much everything. I just bought the manual for mine. I'll see what happens.The URL is: http://www.getmanual.com/ Edited June 8, 2005 by heloo Link to comment Share on other sites More sharing options...
elpedro Posted June 8, 2005 Report Share Posted June 8, 2005 Hey guys and anyone still looking at this thread. First off, thanks for the service manual for nh600d. I am researching into doing a upgrade to my nh600d to a nh600 (basically just adding the line in and dc in. I opened up my nh600d for inital inspection and found the necessary socket holes for the parts are made on the mainboard. I have been looking thru the sevice manual for the nh600d and it seems that the chip has a mic in/line in on the chip just not inuse. I having trouble looking through the manual to see if in fact the necessary chip section is connected to the line in holes on the main hole, Would anyone know if it is? and also the dc in? and if holes for the line in and dc in are connected to the board and just require finding and soldering the appropriate parts (it would silly if it was that easy). Is there a value in the service mode of the nh600d to make the download button the rec button as it is in the nh600? Sorry if thats alot of questions and maybe even confusing. I have a thread made for this http://forums.minidisc.org/index.php?showtopic=10497. And for the ppl wondering why I would bother with it, if the ports are cheap and I can upgrade it easily then I don't need to buy another unit for recording and other ppl with a nh600d can get more use out of their cheap low end nh600d. Thanks everyone and anyone who helps me out. [attachmentid=351] Link to comment Share on other sites More sharing options...
lolofon Posted July 19, 2005 Report Share Posted July 19, 2005 hi, i have NH900 but i can't get into service menu, why?(sry 4my bad eng) Link to comment Share on other sites More sharing options...
johnnytsunami Posted July 29, 2005 Report Share Posted July 29, 2005 i can't enter service mode. i have a mz-nh600 Link to comment Share on other sites More sharing options...
Ishiyoshi Posted July 29, 2005 Report Share Posted July 29, 2005 Welcome to MDCF, lolofon and johnnytsunami.Please download the service manual for your respective units from the download section and follow the instruction as outlined within the service manuals. Link to comment Share on other sites More sharing options...
johnnytsunami Posted July 29, 2005 Report Share Posted July 29, 2005 (edited) done Edited July 29, 2005 by johnnytsunami Link to comment Share on other sites More sharing options...
lolofon Posted August 2, 2005 Report Share Posted August 2, 2005 Welcome to MDCF, lolofon and johnnytsunami.Please download the service manual for your respective units from the download section and follow the instruction as outlined within the service manuals.←i downloaded manual for MZ-NH900 but i couldn't find steps into service menu (only test menu) Link to comment Share on other sites More sharing options...
Christopher Posted August 2, 2005 Author Report Share Posted August 2, 2005 What do you aspire to do within service mode? Link to comment Share on other sites More sharing options...
lolofon Posted August 2, 2005 Report Share Posted August 2, 2005 What do you aspire to do within service mode?←unblock eu volume protection Link to comment Share on other sites More sharing options...
Christopher Posted August 2, 2005 Author Report Share Posted August 2, 2005 Read this post: http://forums.minidisc.org/index.php?showt...indpost&p=44708 Link to comment Share on other sites More sharing options...
WhEdGe Posted August 20, 2005 Report Share Posted August 20, 2005 (edited) hi@all!volume hack has been done. okay, nice! but what about adding Digital Pitch Control to a mz-nh600? has anybody an idea? Edited August 20, 2005 by WhEdGe Link to comment Share on other sites More sharing options...
crazyman50000 Posted August 26, 2005 Report Share Posted August 26, 2005 (edited) My first post Been reading this and I must say, Im impressed so farI love my MZ-NH600 European, but for some reason, it seems to take 90seconds - 2 minutes to load an almost full Hi-MD into SS. Is this normal?Anyway, if ANYONE can unlock MP3 playback somehow, help me fix that minor problem (playing is fine, it says 6 seconds on SS 3.2 but then just hangs before loading normally) OR even help me boost sound output (I might have a piss about myself, 600's are only £60 to buy, so it's not like Im arsed if mine breaks)Edit : Found thisType in the codePress upPress up x 3Press >> till "115"Press V+ till last 2 digits are CCPress group x 5You should see "VolMax CC"Maybe someone can work out how to "save settings" Ill be able to get a louder OP possibly Edited August 26, 2005 by crazyman50000 Link to comment Share on other sites More sharing options...
crazyman50000 Posted August 28, 2005 Report Share Posted August 28, 2005 Found something out you peeps might be able to usePressing group scrolls through the memory deifnitions (I think)But you eventually get some letters that make sense Link to comment Share on other sites More sharing options...
ZareliMan Posted September 4, 2005 Report Share Posted September 4, 2005 My first post Been reading this and I must say, Im impressed so farI love my MZ-NH600 European, but for some reason, it seems to take 90seconds - 2 minutes to load an almost full Hi-MD into SS. Is this normal?Anyway, if ANYONE can unlock MP3 playback somehow, help me fix that minor problem (playing is fine, it says 6 seconds on SS 3.2 but then just hangs before loading normally) OR even help me boost sound output (I might have a piss about myself, 600's are only £60 to buy, so it's not like Im arsed if mine breaks)Edit : Found thisType in the codePress upPress up x 3Press >> till "115"Press V+ till last 2 digits are CCPress group x 5You should see "VolMax CC"Maybe someone can work out how to "save settings" Ill be able to get a louder OP possibly←To save you should press the pause button, so it will apear a full MD on the corner of the screen, at least my NH600 does that when saving in service mode...Anyway my unit doesn't get any louder by the 'Manual>113 A0' value... Link to comment Share on other sites More sharing options...
tommypeters Posted September 4, 2005 Report Share Posted September 4, 2005 It should have exactly the same volume up to and including step 25, then an unhacked shouldn't increase in volume when you go up through 26 to 30, if you don't have EQ on. That's how I have understood it. With a hacked Euro player the volume should increase in steps all the way to 30, but at for example step 23 the volume should be exactly the same as an unhacked player at step 23.However, I have an unhacked European NH600 and the volume does increase all the way up to 30, sound set to "Normal" meaning no EQ. (I have understood it that when using EQ the volume will increase by compressing the sound) Since my player doesn't behave as I have expected I have put hacking it on hold, until I feel I understand how the volume should work on my player. Can anyone enlighten me? Link to comment Share on other sites More sharing options...
crazyman50000 Posted September 4, 2005 Report Share Posted September 4, 2005 Pressing pause does jack.I screwed around with a load of memory defaults, now the damn thing won't read or write Hi-MDs Cheap Sony rubbish ¬_¬ Link to comment Share on other sites More sharing options...
greenmachine Posted September 4, 2005 Report Share Posted September 4, 2005 Unexperienced users are not supposed to enter the service mode at all. Getting malfunctions from randomly messing with settings doesn't make Sony products bad. Link to comment Share on other sites More sharing options...
Hironiemus Posted September 4, 2005 Report Share Posted September 4, 2005 I have a virus on my computer so it doesn't work properly.cheap windows/computer rubbish besides: unfortunately this is true Link to comment Share on other sites More sharing options...
ZareliMan Posted September 4, 2005 Report Share Posted September 4, 2005 Another proof that the Service Mode isn't a toy... Link to comment Share on other sites More sharing options...
redfootball Posted September 5, 2005 Report Share Posted September 5, 2005 ok. i'm guilty of wanting to repair my Hi-MD myself, rather than sending to Sony... so i took the risk and am a victim of myself. i have the mz-nh900 and i downloaded the service manual. after following all the steps, i am now getting a msg that says 'ERROR EE'. i saw that a previous poster had the same problem, but no solution was presented at the time. is this fixable? or is this truly the end of the life of this hi-md recorder? thx Link to comment Share on other sites More sharing options...
The Low Volta Posted September 5, 2005 Report Share Posted September 5, 2005 @redfootball... I do not know whether a DIY solution even exists, or whether it would be a good idea to attempt it yourself as your previous attempt didn't work out that well, did it now so if it's still under warranty, you could always take it in for repairs and go: "well mister, I do not really know a lot of electronic machinery...but when I popped in a disc last night all I got was this (show the error) and I do know that it isn't supposed to say that... perhaps it didn't like the music on that disc? It was Mariah Carrey or something, so that could be it "well, without the Mariah bit of course, but just play dumb and do not mention you went into service mode yourself... it could well be that they repair it under warrantyhope this helps, Link to comment Share on other sites More sharing options...
crazyman50000 Posted September 5, 2005 Report Share Posted September 5, 2005 @ my problemI phoned up Sony, they said "return to retailer"This models discontinued and Im gunna tell them I can't afford the next model, get a refund, then buy a nice new NW-HD3 off ebay for £40 more! Link to comment Share on other sites More sharing options...
dr_hillmann Posted September 23, 2005 Report Share Posted September 23, 2005 i can enter the serice mode on my UK MZ-NH900 and i want to do the volume increasing hack. where do i go from entering the service mode menu? Link to comment Share on other sites More sharing options...
greenmachine Posted September 23, 2005 Report Share Posted September 23, 2005 http://forums.minidisc.org/index.php?showt...528entry43528or follow the 'uncapped thanks to mdcf' link in 'the low volta's signature. Proceed at your own risk, you could cause serious damage if you mess with other settings. Link to comment Share on other sites More sharing options...
RCJ Posted October 28, 2005 Report Share Posted October 28, 2005 Bad news is:I accendently erase the patch and my MZ-NHF800 was dead as a rock too. I try a lot of adjusting... after hours of playing with those small buttons and the big dial (compare to my mz-r900 it's really big), it still show me noPach. Just before I want to give up, or when I decided to give up. I am at the deadly "NV 921 PatVer" menu. I press the pause key again and thinking whether I should use fedex or UPS to send it back.....While the small disk is running on the little screen, I think what the hack, then I just pull out the USB line.....At that moment, there is neither bettery nor AC. So, essentially, I remove all the power while the unit is trying to write something into somethere....The good news isMy MD MYSTERIOUSLY REVIVED!!! Immediately after that!! I am able to play, My computer can see this little "Removable Disk" drive and read/write files on a 80min MD disk in hi-md mode... Currently my one and the only 1GB disk is not around me, so I can not test it. I do go back and check again, the "NV 921 PatVer" it stil showing me noPach.. Why don't you give it a try. and see if this work for you. BTW, the major change I have down while playing with the service mode includes NV 112, NV 113, NV924, and of cause NV921.Good luck! and wish AOIX can give some good news backHi AOIX.could you fix your problem with the error EE?A friend has a NH900 with the same problem and we hope we can solve the problem as "short" described it.Regards from GermanyRCJ Link to comment Share on other sites More sharing options...
crazyman50000 Posted October 29, 2005 Report Share Posted October 29, 2005 I got my player back from the retailer with "no fault found"Turns out it was the discs.My MZ-NH600 has now been boxed and bunged in my loft.I now have a nice new shiny NW-HD3 with SP OFF and it works fine Link to comment Share on other sites More sharing options...
mafija Posted November 1, 2005 Report Share Posted November 1, 2005 Welcome to MDCF, lolofon and johnnytsunami.Please download the service manual for your respective units from the download section and follow the instruction as outlined within the service manuals.Can i get the answer for this?Or i'm just asking to much?Thanks a lot. |||Can somebody tell me in very simple way about tweaking MZ-N10 model?Can the tweak make it better than it is now(default)? Link to comment Share on other sites More sharing options...
rei-gouki Posted November 17, 2005 Report Share Posted November 17, 2005 Download link for the N10 service manual at MDCFGet that. If you don't understand it, don't tinker with it. A few members have made paperweights because they didn't know what they were doing. Link to comment Share on other sites More sharing options...
bobarevm Posted November 27, 2005 Report Share Posted November 27, 2005 Did anyone know the original values of mz-rh910....?I see on my display...Error ee...(((( Link to comment Share on other sites More sharing options...
kapel1 Posted November 28, 2005 Report Share Posted November 28, 2005 Problem!!!Help. MZ-RH10 Mini disc problem (no disc, read error....)I don't now is fix.Please is factory disposition.Tank You. Link to comment Share on other sites More sharing options...
kapel1 Posted November 30, 2005 Report Share Posted November 30, 2005 error ee.help me main email : nitro12@wp.plmain mz-rh10 fix. (error ee) Link to comment Share on other sites More sharing options...
Richard Posted November 30, 2005 Report Share Posted November 30, 2005 error ee.help me main email : nitro12@wp.plmain mz-rh10 fix. (error ee) Unfotunately it looks like you changed some settings you shoudn't have and the best course of action is probably to send the unit in for service. Link to comment Share on other sites More sharing options...
kapel1 Posted December 1, 2005 Report Share Posted December 1, 2005 manuals0110....cc0111....cc0112....cc0113....240114....800115....000120....cc0121....140122....A90123....CC0124....350130....CC0131....190132....1A0133....DC0200....CC0210....CC0211....2E0212....1E0213....8D0214....280215....220216....690127....180218....140219....CC0220....CC0221000000022200000002230000000230....CC0231....010300....CC0310....CC0311....FF0312....3F0313....CC0900....CC0910....CC0911....000912....000920....CC0921....00Help me "error rr" MZ-RH10 Link to comment Share on other sites More sharing options...
Richard Posted December 1, 2005 Report Share Posted December 1, 2005 (edited) Please see my last message to avoide any further mishaps I would send the unit in for service as opposed to trying to fix it yourself. Edited December 1, 2005 by richyhu Link to comment Share on other sites More sharing options...
Recommended Posts